The open concrete structure cooling tower is a cooling tower that uses reinforced concrete as the skeleton structure. The tower body adopts a large-span concrete frame structure, and the partition wall between the tower and the tower is made of concrete to ensure compactness and stability. The overall structure of the cooling tower has been optimized. Under the premise of meeting the requirements of the specification, the cross-section of the beam and column is small, which has a relatively obvious effect on reducing the wind resistance in the tower body and improving the cooling effect of the tower body.

Seagull currently adopts two fog elimination modes: (1) fin type mist elimination device (2) condensing fin module type mist elimination device; 2. The mist elimination device does not need to add additional external heat source: using the actual height and space of the cooling tower, The fog elimination device is installed to finally reduce the moisture content of the outlet air, so as to achieve the purpose of eliminating fog and water saving; 3. The mist elimination device can be designed according to the customer's requirements, and there are usually two standards of "less fog type" and "zero fog type". 4. Seagull designed fog-eliminating cooling towers are easy to operate and maintain, with simple layout and structure of fog-eliminating water-saving devices, easy operation and equipment maintenance; Fiberglass structure.

With the improvement of environmental protection requirements, the demand for cooling tower fog elimination is prominent. Of course, the guarantee of the temperature drop function of the cooling tower is the basic and primary task of the anti-fog cooling tower. The design of the anti-fog and water-saving should be based on the guarantee of the cooling effect. The anti-fog function based on the designed anti-fog point is the breakthrough point of the design of the anti-fog tower, and it is also the technical core of the Seagull cooling tower. The guarantee of the anti-fog effect will naturally also bring about the realization of the water-saving function, and the two complement each other. Rain and fog pollution is not harmful to the surrounding environment, but due to the special reasons of industrial equipment and the lack of knowledge of cooling towers, it is easy to be misunderstood as a misunderstanding of toxic smoke emission; because rain and fog increase the air humidity of the atmosphere, it will also increase to some extent. The probability of foggy weather;